background image

 

37 

 

2. 

Use OUT/+ key to view the MIN/MAX temperature and humidity 
data for the selected transmitter. 

3. 

To reset the minimum and maximum temperature and humidity 
data, and the times at which they were recorded, press the SET 
key continuously for about 3 seconds. This will reset the MIN/MAX 
data recorded to the current time, date, temperature and humidity. 
The current time taken is the normal displayed time and does not 
regard the time zone set for the unit. 

Note:

  The MIN/MAX data for each transmitter needs to be reset 

separately. 

 

LOW BATTERY INDICATOR 

Low battery indicator is displayed on the LCD when the batteries in the 
weather station require changing. 

 

ABOUT THE OUTDOOR TRANSMITTER 

The range of the Thermo-hygro transmitter may be affected by the 
temperature. At cold temperatures, the transmitting distance may be 
decreased. Please keep this in mind when positioning the transmitters. 
Battery power may be reduced for the Thermo-hygro transmitter at cold 
temperatures. 

 

38 

 

CHECKING FOR 915MHz RECEPTION 

If the outdoor temperature and humidity data are not being received 
within three minutes after setting up (or outdoor display always show “- 
-. -” in the outdoor section of the Weather station during normal 
operation), please check the following points: 
1. 

The distance of the Weather station or transmitters should be at 
least 5 to 6.5 feet (1.5 to 2 meters) away from any interfering 
sources such as computer monitors or TV sets. 

2. 

Avoid placing the transmitters onto or in the immediate proximity of 
metal window frames. 

3. 

Using other electrical products such as headphones or speakers 
operating on the 915MHz-signal frequency may prevent correct 
signal transmission or reception. Neighbors using electrical devices 
operating on the 915MHz-signal frequency can also cause 
interference. 

 

Note:

 When the 915MHz signal is received correctly, do not re-open the 

battery cover of either the transmitter or Weather station, as the batteries 
may spring free from the contacts and force a false reset. Should this 

 

39 

 

happen accidentally, reset all units (see 

“Setting up”

 above), or 

transmission problems may occur. 

 

The transmission range is around 300 feet from the Thermo-hygro 
transmitter to the Weather station (in open space). However, this 
depends on the surrounding environment and interference levels. If no 
reception is possible despite the observation of these factors, all system 
units have to be reset (see 

“Setting up” 

above). 

 

POSITIONING THE WEATHER STATION 

The Weather station provides the option of table standing or 
wall mounting the unit. Before wall mounting, please check 
that the outdoor data can be received from the desired 
locations.  
 

 

TO WALL MOUNT: 

1.  Fix a screw (not supplied) into the desired wall, leaving 

the head extended out by about 

0.2” (

5mm).  

2.  Place the weather station onto the screw, using the 

hanging hole on the backside. Gently pull the weather 
station down to lock the screw into place. 

 

40 

FOLDOUT TABLE STANDS: 

The foldout table stands legs are located on the 
backside. Simply unfold the stands on the back. Once 
the foldout table stands are extended, place the weather 
station in an appropriate location. 

 
 
 
 
 

POSITIONING THE THERMO/HYGRO TRANSMITTER: 

The remote thermo/hygro transmitter can be placed onto 
any flat surface or wall mounted using the bracket which 
doubles as a stand or wall mount base. 

 

 
 
 

 

TO WALL MOUNT:  

1.  Secure the bracket onto a desired 

wall using the screws and plastic anchors. 

Summary of Contents for WS-9057U













Reviews: