background image

  11

WARRANTY INFORMATION 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 
manufacturing defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products 
purchased and used in North America and only to the original purchaser of this product.  
To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for 
problem determination and service procedures.  Warranty service can only be 
performed by a La Crosse Technology, Ltd authorized service center.  The original 
dated bill of sale must be presented upon request as proof of purchase to La Crosse 
Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no 
charge as stipulated herein, with new or reconditioned parts or products if found to be 
defective during the limited warranty period specified above.  All replaced parts and 
products become the property of La Crosse Technology, Ltd and must be returned to La 
Crosse Technology, Ltd.  Replacement parts and products assume the remaining 
original warranty, or ninety (90) days, whichever is longer.  La Crosse Technology, Ltd 
will pay all expenses for labor and materials for all repairs covered by this warranty.  If 
necessary repairs are not covered by this warranty, or if a product is examined which is 
not in need or repair, you will be charged for the repairs or examination.  The owner 
must pay any shipping charges incurred in getting your La Crosse Technology, Ltd 
product to a La Crosse Technology, Ltd authorized service center.  La Crosse 
Technology, Ltd will pay ground return shipping charges to the owner of the product to a 
USA address only. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and 
workmanship with the following specified exceptions: (1) damage caused by accident, 
unreasonable use or neglect (including the lack of reasonable and necessary 
maintenance); (2) damage occurring during shipment (claims must be presented to the 
carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) 
damage resulting from failure to follow instructions contained in your owner’s manual; 
(5) damage resulting from the performance of repairs or alterations by someone other 
than an authorized La Crosse Technology, Ltd authorized service center; (6) units used 
for other than home use (7) applications and uses that this product was not intended or 
(8) the products inability to receive a signal due to any source of interference..  This 
warranty covers only actual defects within the product itself, and does not cover the cost 
of installation or removal from a fixed installation, normal set-up or adjustments, claims 
based on misrepresentation by the seller or performance variations resulting from 
installation-related circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH 
THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT 
TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS 
PRODUCT IS NOT A TOY.  KEEP OUT OF CHILDREN’S REACH. 

Summary of Contents for WS-8300U













Reviews: