La Crosse Technology, Ltd.
Page 9
Wind Chill only reads in Fahrenheit
The wind chill will only read in Fahrenheit. The outdoor and indoor temperatures can be switched to
Celsius in the Temperature section.
Wireless Rain Transmitter
How to view rain on the weather station
View:
With the rain icon flashing, press either the SET or the MEMORY button to recall a rain
statistics for the past hour, past 24 hours, yesterday, past week or past month.
Note:
Last Hour rainfall value displays
as a rate of rain in either “inch/hr.” or “mm/hr.”
Reset rain
With the rain icon flashing, press and hold the MEMORY button to reset
all
rainfall statistics.
Rain readings
For all measurements, it is important time and date are set correctly on your weather station.
1-HOUR RAIN: The 1-hour rain reflects rain that has fallen from current time and back 1-hour. The
hour is not a fixed clock time measurement.
It is literally an ongoing “last 60 minutes” timer.
24-HOUR RAIN: The 24-hour rain reflects the rain that has fallen from current time and back 24-
hours. This is not a midnight-to-midnight measurement. The day is not a fixed clock time
measurement. It is literally an ongoing “last 24 hours” timer.
YESTERDAY: This reflects the rain that has fallen from midnight to 23:59. This is a midnight-to-
midnight measurement. The day is a fixed clock time measurement.
WEEKLY RAIN: The amount of rainfall from the previous week. The week is midnight Sunday to
midnight Saturday.
MONTHLY RAIN: Monthly rain reflects the previous month’s rain and will update 12AM the first day of
the month.
Rain reads 0.00
Check that the pin the rocker tips on is all the way to the back and that the rocker tips freely.
Check the funnel and the inside of the rain transmitter for insect nests or debris that may cause loss
of rocker motion.
Check for proper battery installation.
Check the battery cover is on firmly.
Mount the rain transmitter level and check that the mounting screws are not too tight (most common
issue).
Use the eraser end of a pencil to manually tip the rocker of the rain transmitter 10 times (five each
way).
Wait at least 2 minutes for all the rain to collect.
Check the Total Rain on the weather station for a reading.
Complete a
factory restart
.
Rain reads dashes
The weather station and rain transmitter are not connected.
Complete a
factory restart
.
Check that the Wind and Temperature are still working. If Wind and Temperature are not working
then it may be a weather station issue.
Distance/Resistance
can cause loss of transmitter signal.
Check
batteries
in the rain transmitter and the weather station. This is our primary warranty issue.
Orient the weather station 90 degrees towards the rain transmitter for better reception.
