La Crosse Technology, Ltd.
Page 2
Clock Factory Restart
1.
Remove batteries and AC power from the clock.
2.
Press one of the buttons on the clock at least 20 times to clear all memory. Verify that the
clock is blank before proceeding.
3.
Let the clock sit with batteries out for at least 10 minutes.
4.
Insert the AC power cord or fresh alkaline batteries in the clock.
Projection Alarm Clock
How tall are the Time Numbers?
⋅
The time numbers are 1.25 inches tall.
12-Hour or 24-Hour Time Format
⋅
Display the time in 12-hour or 24-hour format
⋅
Default is 12-hour time.
⋅
Use the
Power Requirements
⋅
This clocks powered by a 4.5 volt AC power adapter
⋅
Alternatively, optional 2-AAA alkaline
Fahrenheit/Celsius
⋅
Be sure the Time is showing on the clock.
⋅
Use the program menu to switch between Fahrenheit and Celsius for the indoor temperature
reading.
Inaccurate Indoor Temperature Reading
⋅
Look for heat sources such as sunlight, door or window frames, or reflected heat of cold.
Projection
TIME will project continually when operating with the AC power cord. This is the constant item to
be projected. There is not an option to project indoor temperature.
Battery Operation: Press and release the SNOOZE/LIGHT button to show the projection for 3
seconds.
Note: Projection will not display constantly when operating on battery power.
AC Operation: Projection will display constantly.
Projection Arm: The projection arm will rotate 180 degrees to allow you to project on the wall or
ceiling.
Projection Rotation: Press and release the PROJECTION button to rotate the projected time in 90-
degree increments.
Focus: Adjust the focus of the projection with the focus wheel on the back of the projection arm.
