3 |
P a g e
ADD SENSOR: How can I add sensor to my La Crosse View™ app?
............................................................................................... 21
GENERAL INFORMATION
BATTERIES: WHAT DO I NEED TO KNOW ABOUT BATTERIES?
•
Good fresh batteries are important for best performance in your sensors and as backup in your station.
•
Batteries with an expiration date of 2020, were manufactured in 2010.
•
We recommend batteries with an expiration date no more than 6 years in advance of the current year for best
performance.
•
A minimum voltage of 1.48 v per battery is required for the best performance.
•
Lithium batteries may be used in outdoor sensors. Alkaline batteries for the station.
HARDWARE: SENSORS AND STATION
Your V22V2 station comes with:
LTV-W1 Wind Speed sensor.
LTV-R3 Rain sensor
LTV-TH2 Thermo-hygro sensor that reads Temperature and Humidity.
All sensors operate at 915MHz RF.
WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION?
LTV-W1: 2-C batteries
LTV-R3: 2-AA batteries
LTV-TH2: 2-AA batteries
V22V2: 5 volt power cord (required) and 3-AA batteries for optional backup of your time and
date. Battery operation only will not update sensor or Wi-Fi data. Power cord is required.
POWER INPUT: WILL THIS STATION WORK IN OTHER COUNTRIES??
•
Your power cord input is 100-240V 0.3A 50/60Hz and may work in other countries if the proper plug adapter is
used (not included).
Note: There is no guarantee that this power cord will work in other countries.
•
As a standalone station-, you can use this anywhere.
•
Weather information will be based on zip code, or city selected.
SETUP: HOW DO I SETUP MY STATION?
Your station is a fully functional standalone station.
1.
Install batteries into each sensor (any order).
2.
Install power cord into wall outlet, and into the station. Install batteries in the station if you wish.
3.
Let sensors and station sit within 10 feet of each other for several minutes to lock the sensor signals to the
display.