La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 3
9.
When RF connection is established, the temperature will appear on the station. Allow
the remote sensor and weather station to sit together for 15 minutes to establish a
strong connection.
10.
Do not press buttons for 15 minutes.
•
For optimum 433MHz transmission, place the remote sensor no more than 330 feet
(100 meters, open air) from the weather station.
•
and
distance/resistance/interference
for details on
mounting the remote sensor.
Quick Connect
Explanation: Use the quick connect for a weather station and remote sensor that have
been working but lost connection due to interference or low batteries. This is not the same
as a thorough factory reset.
1.
Bring the remote sensor and weather station together inside and place the units 5-10
feet apart with nothing between them.
2.
Hold the HEAT/DEW button for 5 seconds. The remote temperature area will flash.
3.
Remove battery cover from the remote sensor and press and release the TX button to
send the signal.
4.
Wait for 2 minutes for the remote temperature to appear on the weather station.
•
If the above procedure does not work, please try the factory reset.
Remote Temperature Sensor
Compatible Remote sensors
•
The TX141TH-Bv3 remote sensor comes packaged with this weather station.
•
The TX141TH-B (all versions) sensors are compatible with this weather station.
Remote Temperature Signal Strength
Explanation: The weather station will search for the remote temperature/humidity sensor
for 3 minutes after installing batteries or after holding the HEAT/DEW button for 3 seconds.
•
The antenna symbol will flash during reception.
•
The temperature display will be dashes “---“.
•
If synchronization fails once, the antenna will lose one bar.
•
If synchronization fails twice, the antenna will lose two bars.
•
If RF (radio frequency) reception fails five times, the antenna symbol will show without
bars.
•
The antenna will show full display with successful RF (radio frequency) reception.
Dashes show for Remote Temperature
Explanation: Dashes mean the connection is lost between the weather station and the
remote sensor.
•
often resolve the connection.
