12 |
P a g e
•
When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. The flashing alert icon will indicate it is a LO or HI alert.
•
Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.
Set Alerts:
1.
Press and hold the ALERTS button 2s to enter alert set mode.
2.
Press and release the OUT/+ or – button to turn alert ON/OFF
3.
If alert is ON, the alert value is flashing. Use the OUT/+ or – buttons to set. Hold the OUT/+ or
– buttons to scroll quickly.
4.
Press and release ALERTS button to move to next item.
5.
Leave an alert OFF (disarmed) and press the ALERTS button to skip setting that alert value
6.
The alert icon will show when the alert is active.
7.
When armed alert value is reached, station will beep 5 times each minute, until out of alert
range.(1 second beep once, sound for 5 seconds, wait 55 seconds and then repeat began to
ring for 5 seconds.)
8.
The flashing alert icon will indicate if it is a LO or HI alert.
9.
Press any button to stop the temp alert sound. The alert icon will flash while value is in
alert range
Alert Setting Order:
•
Outdoor LOW Temperature ON/OFF
•
Outdoor LOW Temperature Value -40°F-140°F (-40°C-60°C)
•
Outdoor HIGH Temperature ON/OFF
•
Outdoor HIGH Temperature Value -40°F-140°F (-40°C-60°C)
•
Outdoor LOW Humidity ON/OFF
•
Outdoor LOW Humidity Value 10%RH-99%RH
•
Outdoor HIGH Humidity ON/OFF
•
Outdoor HIGH Humidity Value 10%RH-99%RH
•
Indoor LOW Temperature ON/OFF
•
Indoor LOW Temperature Value 32°F- 122°F (0°C-50°C)
•
Indoor HIGH Temperature ON/OFF
•
Indoor HIGH Temperature Value 32°F- 122°F (0°C-50°C)
•
Indoor LOW Humidity ON/OFF
•
Indoor LOW Humidity Value 10%RH-99%RH
•
Indoor HIGH Humidity ON/OFF
•
Indoor HIGH Humidity Value 10%RH-99%RH
CAN I ADD SENSORS?
This station can display data for up to 3 extra Temperature and Humidity Sensors and one Rain
Sensor. These sensors will share space with the Pressure. When additional sensors are added,
press the EXTRA button to cycle through Extra Sensor and Pressure data.
