manualshive.com logo in svg

La Crosse Technology RADIO CONTROLLED ALARM CLOCK WITH SOLAR PANEL, Operating Manual, Page: 4 / 8

Share
Download
La Crosse Technology RADIO CONTROLLED ALARM CLOCK WITH SOLAR PANEL Operating Manual Download Page 4

 

 : 

 

Back-light-On 

AL/MIN  

:

 

Alarm 2 time setting, alarm 2 icon 

(((2)))

, alarm STOP  for alarm 2 

 

: 

Set the minutes and snooze duration

 

:

 

Back-light-On

 

 

THE ALARM SOUND 

When the alarm 1 is activated, it sounds as follows: 
From 0 to 26 seconds 

: 2 short and gentle continuous beeps 

From 27 to 54 seconds 

: 4 short continuous beeps 

From 55 seconds to 1 minute 35 seconds  : very short continuous beeps 

 

Notes:

   The alarm 1 & 2 will automatically cut off after a time of 1 minute and 35 

seconds. The alarm is not switched off but will sound again at the same 
time on the following day. 

 

ALARM SETTING: 

 
 

 

 

 

 

TO SET ALARM 1 & 2:

 

1. 

Press the “

AL/HR

” key until (((1))) icon appears and the AL 1 icon on the LCD

 

starts 

flashing. 

If the waiting time is too long, flashing will stop and the time 

can not be set any longer. In such case simply press the “

AL/HR

” key once 

again and the display will resume flashing.

 

2. 

While the display is flashing: Set the hours and minutes of the desired alarm 
time by use of the “

AL/HR

” (hours) or the “AL/MIN” keys (minutes) 

respectively. (If the respective key is pressed permanently the hours setting 
will continuously advance by steps of 1 and the minutes setting by steps of 5). 

3. 

Once the alarm time is set, press the “SNOOZE/

24HR AL

/

” key to confirm 

or wait approximately 8 

seconds (automatic exit of alarm time setting mode, 

AL 1 will stop flashing

). 

4. 

To set alarm 2, repeat 

above steps

 but use the “AL/MIN” key. 

  

Note: 

If both alarms are set for the same time then only alarm 2’s sound will be 
heard. The date cannot be displayed when Alarm 2 setting is activated.

 

 

TO CHANGE FROM ALARM 2 TO DATE DISPLAY: 

1. Press 

and 

hold down the “AL/MIN” key, the AL2 icon will flash (if present) and 

the alarm on/off icon “(((2)))” (if present) will disappear. 

2. 

Press the “SNOOZE/

24HR AL

/

” key to confirm or wait approximately 8 

seconds to exit.  The date will appear in place of alarm 2  time setting. 

 Hours setting 

AL 1 

(flashing)

 

3. 

To return to alarm display, simply press the “AL/MIN “ key again.  

 

Minutes setting  

Note:    

The date can only be displayed with reception of DCF time and

 

the calendar 

will change accordingly to DCF time from Frankfurt. 

  

Summary of Contents for RADIO CONTROLLED ALARM CLOCK WITH SOLAR PANEL









Reviews:

No comments