Page | 19
Wi-Fi Projection Alarm Clock
LOW BATTERY INDICATOR
• Low Battery by Indoor Temperature, replace battery in your Alarm clock.
FACTORY RESET ALARM CLOCK
A factory restart of your alarm clock will remove all Wi-Fi settings and returns your alarm clock to its default
settings and “out of the box” condition. This may resolve connection issues with your sensors or Wi-Fi.
1. Hold the ALARM and NAP buttons together for 5 seconds.
2. Your alarm clock will reset and search for Wi-Fi.
3. If sensors are attached, the alarm clock will search for all sensors. Allow up to 3 minutes to acquire
sensors.
4. You will need to reconnect to your La Crosse View app by following the steps on
page 7.
If you require additional support, call our friendly customer support team based out of La Crosse, Wisconsin.
Phone:
1.844.200.8752
Or fill out our online support request form here:
bit.ly/contact_techsupport
Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
WE’RE HERE TO HELP!
CARE & MAINTENANCE
• Do not mix old and new batteries in extra sensors.
• Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment when it is not used for an extended period of time.
• Promptly remove expired batteries.
