La Crosse Technology, Ltd
Page 5
Weekend
- Will only alarm Saturday and Sunday when active. (Clock icon with 2 lines
below)
•
Press and release the ALARM button to view alarm time.
•
With alarm time showing, hold the ALARM button for 3 seconds to enter alarm settings.
•
Set the time then select alarm type: (Single alarm, Mon-Fri alarm, or Weekend alarm)
•
Setting and activating the alarm are separate functions.
Set Alarm:
1.
Press and release the ALARM button to view alarm time.
2.
With alarm time showing, hold the ALARM button for 3 seconds to enter alarm time set
mode. Press the +/- button to adjust the alarm hour.
3.
Press the ALARM button to confirm and move to the minutes. Press the +/- buttons to
adjust the alarm minutes.
4.
Press the ALARM button to confirm and move to alarm type. Use the +/– to select
SINGLE, MON-FRI or WEEKEND alarm. Press the ALARM button to confirm and exit.
Note:
This is a crescendo alarm. It will sound for two minutes then shut off completely if no
buttons are pressed.
Activate/Deactivate Time Alarm
•
When you finish settings, the alarm is active.
•
From the normal time display, press and release the ALARM button to view alarm.
•
Press and release the ALARM button to deactivate or to activate the alarm.
•
When active the alarm clock icon will show.
•
The clock icon will not show if the alarm is not active.
Snooze Alarm
•
When the alarm sounds, press the SNZ/LIGHT button. The alarm will be silent for the
preselected snooze duration. Snooze duration is set in the
•
SNOOZE - duration will show, and the snooze time will count down.
•
When the alarm sounds again, the SNOOZE - 0 will flash.
USB Charge Port
Explanation:
The alarm clock has two integrated USB charging ports that will charge a
device when operating on AC power.
Note:
We have included a USB to Lightning USB or Micro USB cable for your
convenience.
Charge devices that self-regulate.
•
Do not charge multiple devices from the same USB port.
•
For Tablets and other high power devices, use the USB port on the right (2 Amp).
•
Must operate clock with power cable to charge other devices.
•
Plug your device into one of the USB ports on the front of the clock.
