La Crosse Technology C86224 Faqs Download Page 3

La Crosse Technology, Ltd  

Page 3 

 

Fahrenheit/Celsius 

 

 

Use th

program menu

 to display the indoor temperature in Fahrenheit or Celsius. 

 

Insert fresh alkaline batteries with correct polarity.  

 

If the indoor temperature still shows dashes, HH.H or LL.L, the alarm clock may need 
replacement. 

 

Does the clock have a backlight? 

 
Yes, this alarm clock has a backlight. 

 
AC adapter:

  

The backlight can show continuously when operating the alarm clock with the 5-volt AC 
adapter.  
 
HIGH: The backlight is defaulted to HI (brightness) when the AC adapter is in use. 
LOW: Press and release the SNOOZE/LIGHT button to 

dim

 the intensity of the backlight.  

OFF: Press and release the SNOOZE/LIGHT button to turn the backlight off to sleep. 

 
Note:

 When the AC adapter is NOT in use, the HIGH-LOW-OFF backlight feature is not 

available. 

Note:

 When the backlight is off, press any button to activate the backlight for 10 seconds, 

and then it will turn off again.  
 

Battery power: 

 

Press and release the SNOOZE/LIGHT button and the backlight will show for 10 seconds, 
when operating on batteries only. 
 
Try this exercise in a dim room. The weather station has a bright, dim, and OFF setting for 
the backlight. Wait 15 seconds after pressing the SNOOZE/LIGHT button to see if the 
backlight stays on. This will ensure it is not in OFF mode. 
 
1.     Check that the AC cord is inserted correctly to the weather station and the outlet. 
2.     Remove the batteries. 
3.     Press the SNOOZE/LIGHT button. If the backlight comes on and the display is active 

your AC cord works. 

4.     Wait 15 seconds to see if the back light stays on.  
5.     If the backlight goes out after 15 seconds, repeat #3. 
 

Time is inaccurate 

 

 

This clock has manual set time. Use th

program menu

 to set the time. 

 
 
 
 
 

Summary of Contents for C86224








Reviews: