13 |
P a g e
11.
Press SET to confirm and move to pressure units. WIND SPEED will show. MPH will flash.
Press the + or - button to select KMH.
12.
Press SET to confirm and move to the pressure number. WIND DIR LETTERS will show. NNE
will flash. Press the + or - button to select DEGREES.
13.
Press SET to confirm. THANK YOU shows for 2 seconds, then exit the setting menu.
Note: After 10 seconds with no button press, station returns to normal time display.
WEATHER STATION MESSAGES
WHY DOES “LOST WIFI”, ETC., SHOW ON MY STATION?
When operating as a standalone station, you will occasionally see the words SEE APP TO
CONNECT or LOST WIFI.
•
SEE APP TO CONNECT appears at start up is a prompt to connect to the La Crosse View™
app.
•
LOST WIFI again refers to your station searching for a WIFI connection to connect to the
La Crosse View™ app. You station has found a Wi-Fi service and is awaiting a password.
•
These statements should only flash for a few minutes then disappear.
•
They may show again for a few minutes if you restart the station or press and release the
SET button.
When connected you will have these and other status messages available with a press of the
SET button.
ALL OK CONNECTED:
o
Station is connected all the way through to your app.
CHECK APP:
o
The Wi-Fi router connection is working.
o
Check your connection to the La Crosse View app.
o
Check Notifications in the La Crosse View app
o
Is there an update to install?
LOST WIFI:
o
Check your power cord connection (power cord required to connect)
o
When trying to reestablish your station’s Wi-Fi connection, be sure your mobile device is
on the same 2.4GHz network you want your station to use.
o
Enter your Wi-Fi password again.
o
Check your network connection.
o
Hold the + and – buttons together for 3 seconds to search for Wi-Fi.
NO WEATHER SERVICE:
o
Wi-Fi, and App are fine.
o
Weather/Time service not connecting. This will be resolved at the Weather Server.
Please be patient.
