background image

La Crosse Technology, Ltd  

Page 6 

 

Temperature Alerts 

 

This clock offers HI and LO indoor and outdoor temperature alerts. 

• Outdoor HI 

• Outdoor LO 

• Indoor HI 

• Indoor LO 

 

Set Alerts: 

1.

 

Hold then release the ALERT button 3 seconds. Outdoor ALERTS HI OFF shows. 

2.

 

Press and release and release the +/- button to turn ON the alert. 

3.

 

Press and release the ALERT button again and the outdoor HI alert value will 

flash. 

4.

 

Press and release the +/- buttons to adjust the alert value. 

5.

 

Press and release ALERT: Outdoor ALERTS LO OFF will show. 

6.

 

Press and release and release the ALERT button to turn ON the alert. 

7.

 

Press and release ALERT again LO alert value will flash. 

8.

 

Press and release the +/- buttons to adjust the alert value.  

9.

 

Press and release ALERT: Indoor ALERTS HI OFF will show. 

10.Press and release and release the ALERT button to turn ON the alert. 

11.Press and release ALERT again the HI alert value will flash. 

12.Press and release the +/- buttons to adjust the alert value. 

13.Press and release ALERT: Indoor ALERTS LO OFF will show. 

14.Press, release, and release the ALERT button to turn ON the alert. 

15.Press and release ALERT again LO alert value will flash. 

16.Press and release the +/- buttons to adjust the alert value. 

17.Press and release ALERT to confirm and exit. 

 

Note: If OFF is selected for the alert, you will skip the alert value and move to the 

next alert ON/OFF setting. Press and release SNOOZE at any time to exit. 

 

Temperature Alert Sounds 

 

 

When armed alert value is reached, station will beep 5 times once per minute. 

 

The flashing alert icon will indicate if it is a LOW or HI alert. 

 

Press and release any button to stop the temp alert sound. The alert icon will 

flash while value is in alert range. 

 

HI | LO Temperature readings 

 

Explanation: The atomic clock shows the daily HI | LO temperatures each day 

starting at midnight (12:00 AM). The atomic clock automatically resets the HI | LO 

temperatures at midnight (12:00 AM).   

 

 

HI: Press and release the + button to view indoor high than outdoor high 

temperatures since midnight. 

 

LO: Press and release the - button to view indoor low than outdoor low 

temperatures since midnight. 

 

 

 

Summary of Contents for BBB86118












Reviews: