Relative Pressure
Add-On Temperature & Humidity Sensor
PRESSURE
EXTRA SENSORS
•
Your Relative Pressure reading will come from your station’s internal
barometer.
•
Please allow up to 10 days for automatic calibration, or program your
local pressure value in the Settings Menu.
•
The arrows located to the left of the values represents Pressure
Tendency (rising/falling).
2.
Hold the
MINUS
(
-
) button to delete these Temperature & Humidity readings.
3.
Adding a Separate Temperature & Humidity Sensor
Pressure Reading Example
If you feel the temperature & humidity is not reading correctly from your Breeze Pro
Sensor, you can add a separate sensor to your system.
1.
Press the
SENSOR
button until you see the Outdoor Temperature and Humidity
section light up on screen. “ID WTH 123” and “TWH SENSOR” will appear below.
4.
5.
Install new batteries into the add-on sensor and press the
TX
button inside its battery
compartment. The LED light on the sensor will flash.
Press the
SENSOR
button until this Outdoor Temp. and Humidity section lights up
again. Then hold the
PLUS
(
+
) button until the blue Sensor Reception Indicator starts
to animate.
Additional Add-On Sensors
Rain Data Example
Need a Rain reading? Want an additional Temperature/Humidity
sensor?
This station can display data for up to 4 extra sensors. This data will
appear in the green EXTRA SENSOR section on the LCD.
Find compatible sensors at:
www.lacrossetechnology.com/sensor-finder/
11
The sensor should connect almost instantly with its data appearing on screen. The
icon will remain solid on screen when an add-on TH sensor is being used.
