La Crosse Technology, Ltd
Page 4
Position the atomic alarm clock in a window (
with the front or back
) facing Ft. Collins, Colorado and
leave for up to five nights. If you do not have a window facing this direction, position the clock near an
outside wall and point the unit in this general direction.
Manually Set Time/Date: Program Menu
The SET/°F/°C button will move through the program menu. The
+
or
-
buttons will change a value.
WWVB ON/OFF: Hold the SET/°F/°C button for 5 seconds. WWVB and the word ON will flash. Press
and release the
+
or
-
buttons to turn this to OFF if you do not wish WWVB reception. Confirm with
the SET/°F/°C button and move to the next item.
TIME ZONE: EST will flash. Press and release the
+
or
-
buttons to select a different time zone:
AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific, AKT= Alaska,
HAT=Hawaiian time zone. Confirm with the SET/°F/°C button and move to the next item.
DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release the
+
or
-
buttons to
turn this to OFF if you do not observe DST. Confirm with the SET/°F/°C button and move to the next
item.
12/24 HOUR TIME: 12Hr will flash. Press and release the
+
or
-
buttons to select 24hr. Confirm with
the SET/°F/°C button and move to the next item.
HOUR: The hour will flash. Press and release the
+
or
-
buttons to select the correct hour. Confirm
with the SET/°F/°C button and move to the next item.
MINUTES: The minutes will flash. Press and release the
+
or
-
buttons to select the correct minutes.
Confirm with the SET/°F/°C button and move to the next item.
YEAR: The year will flash. Press and release
+
or
-
buttons to select the correct year. Confirm with
the SET/°F/°C button and move to the next item.
MONTH: The month will flash. Press and release the
+
or
-
buttons to select the correct month.
Confirm with the SET/°F/°C button and move to the next item.
DATE: The date will flash. Press and release the
+
or
-
buttons to select the correct date. Confirm
with the SET/°F/°C button and exit the program menu.
Note:
The Day of the Week will set automatically after the year, month and date are set.
Note:
If no buttons are pressed for 20 seconds, the set mode times out.
FAHRENHEIT/CELSIUS:
Press and release the SET/°F/°C button to select temperature readings in
Fahrenheit or Celsius.
No WWVB Tower Icon
The atomic alarm clock has not received a WWVB time signal in the past 24 hours.
Position
the atomic alarm clock for better reception.
Hold the
-
button to send the Atomic alarm clock on a WWVB signal search at night.
Allow up to 5 nights to receive the time signal.
IMPORTANT:
During A/C power operation, the
backlight and USB charging port
will turn off while the
atomic alarm clock searches for the WWVB to avoid interference. The backlight will return after 4-8
minutes search (which occurs during the late night or early morning hours). The USB charging port will
then resume working.
Set Time Alarm
Press and release the ALARM button once to show Alarm Time. The letters AL will appear where the
seconds display.
ALARM HOUR: Hold the ALARM button to enter alarm time setting mode. The Alarm Hour will flash.
Use the
+
or
-
buttons to set the Hour. Press and release the ALARM button.
ALARM MINUTE: The Alarm Minutes will flash. Use the
+
or
-
buttons to set the Minutes. Press and
release the ALARM button to exit.
Activate/Deactivate Time Alarm
ACTIVATE:
Press and release the ALARM button once to show Alarm Time.
