La Crosse Technology, Ltd.
Page 4
2. 12Hr will flash. Press and release the +or - button if you prefer 24 hour time.
3. Press and release the SET button to confirm and move to the hour.
4. The Hour will flash. Press and release the +or - button to adjust.
5. Press and release the SET button to confirm and move to the minutes.
6. The Minutes will flash. Press and release the +or - button to adjust.
7. Press and release the SET button to confirm and move to the year.
8. The Year will flash. Press and release the +or - button to adjust.
9. Press and release the SET button to confirm and move to the month.
10. The Month will flash. Press and release the +or - button to adjust.
11. Press and release the SET button to confirm and move to the date.
12. The Date will flash. Press and release the +or - button to adjust.
13. Press and release the SET button to confirm and move to Fahrenheit/Celsius selection.
14. The °F will flash. Press and release the +or - button to select °C.
15. Press and release the SET button to confirm and exit.
Display Date Two Ways
Press and release the SET button to toggle between different date displays:
⋅
Full weekday/temperature/humidity
⋅
Weekday/Month/Date/temperature/humidity
Backlight Adjustment
⋅
Power Cord: Backlight and projection are on constantly. Press SNOOZE/LIGHT to adjust the
backlight: High-Medium-Low-OFF.
⋅
Batteries only: Press the SNOOZE/LIGHT button for a 10 second backlight and projection.
Clock Has Missing Segments
⋅
This is generally a power related issue.
⋅
may be overpowered or underpowered. Remove batteries from clock.
⋅
Press any button 20 times. Leave the clock unpowered for 1-2 hours.
⋅
Insert fresh alkaline batteries with correct polarity.
Clock Is Dim
⋅
Most clocks have a gray background. Place the clock at eye level. Is it still dim?
⋅
Clocks that sit in the sunlight can develop a cloudy film over time.
⋅
This is generally a power related issue. Check that the AC cord is plugged in correctly.
⋅
may be overpowered or underpowered. Remove batteries and AC cord from clock.
⋅
Press any button 20 times. Leave the clock unpowered for 1-2 hours.
⋅
Install AC cord and/or fresh alkaline batteries with correct polarity.
Clock Has Distorted Display
⋅
On a brand new clock check for thin plastic films of printed scratch guard that may be on the
upper and lower screen of the clock. This thin piece of plastic has printed numbers for store
displays.
⋅
This film will be easy to peel off the LCD.
⋅
With all power removed the clock should be blank.
⋅
If numbers still appear, please check for scratch guard.
