La Crosse Technology 512-1422 Series Faqs Download Page 14

La Crosse Technology, Ltd.  

Page 14 

 

 

The icons forecast the weather in terms of getting better or worse and not necessarily 
sunny or rainy as each icon indicates.  

 

The weather forecast is about 70-75% correct. As weather conditions cannot be 100% 
correctly forecasted, we cannot be responsible for any loss caused by an incorrect 
forecast. 

 

Digital Atomic Clock Has Distorted Display 

 

 

On a brand new Digital Atomic Clock check for thin plastic films of printed scratch 
guard that may be on the upper and lower screen of the Digital Atomic Clock. This thin 
piece of plastic has printed numbers for store displays.  

 

This film will be easy to peel off the LCD. 

 

With all power removed the Digital Atomic Clock should be blank.  

 

If numbers still appear, please check for scratch guard. 

 

Check that the batteries are installed correctly. 

 

This is a power related issue.  

 

Batteries

 may be overpowered or underpowered. Remove batteries from the 

Digital Atomic Clock.  

 

Press any button 20 times. Leave the batteries out of the display for 2 hours.  

 

Insert fresh alkaline batteries into the Digital Atomic Clock. 

 

Digital Atomic Clock Display Is Frozen 

 

 

On a brand new Digital Atomic Clock check for thin plastic films of printed scratch 
guard that may be on the upper and lower screen of the Digital Atomic Clock. This thin 
piece of plastic has printed numbers for store displays. This can make the Digital 
Atomic Clock display appear “frozen.”  

 

With all power removed the Digital Atomic Clock should be blank.  

 

If numbers still appear, please check for scratch guard. 

 

Check that the batteries are installed correctly. 

 

This is a power related issue.  

 

Batteries

 may be overpowered or underpowered. Remove batteries from Digital 

Atomic Clock.  

 

Press any button 20 times. Leave the batteries out of the display for 2 hours.  

 

Insert fresh alkaline batteries into the Digital Atomic Clock. 
 

Digital Atomic Clock is Blank: No Letters, Numbers or Dashed Lines 

 

 

Check that the batteries are installed correctly. 

 

Batteries

 may be overpowered or underpowered. Remove batteries from Digital Atomic 

Clock.  

 

Press any button 20 times. Leave the batteries out of the display for 2 hours.  

 

Insert fresh alkaline batteries into the Digital Atomic Clock. 

 

Digital Atomic Clock Drains Batteries Quickly 

Summary of Contents for 512-1422 Series
















Reviews: