13
If you are seeing “NO” or dashes for any sensor readings, please try the
following steps:
1.
Hold the
PLUS (+)
button to search for your outdoor sensor.
The Reception Indicator will begin to animate.
2.
If after 3 minutes the sensor still isn’t connected, bring the sensor inside
next to the display and remove power from the sensor and station.
3.
Press any button on the station 20 times and leave the parts sit for a few
moments with the power off.
4.
Install a new set of alkaline batteries into the sensor, then power up your
station again.
5.
If your sensor data is still not appearing after these steps, please contact
our support staff. For additional help visit:
Search for Sensors
Factory Restart
If your station is acting strangly, hold the
ALERTS
and
EXIT/RAIN
buttons
together to factory restart your station.
