La Crosse Technology, Ltd.
Page 7
The SET button will move through the program menu.
The + or - button will adjust values.
Press the PRESSURE button at any time to exit.
Program Menu:
•
Language (English, Español, Francais)
•
Beep On/Off
•
Atomic time signal (On/Off)
•
DST (Daylight Saving Time On/Off)
•
Time Zone
•
12/24 Hour time format
•
Hour
•
Minutes
•
Year
•
Month
•
Date
•
Fahrenheit/Celsius
The SET button will move through the program menu. To change a value use the + or - button.
1.
Hold the SET button five seconds so that ENGLISH appears. Press and release the + or – button if you
wish to change the language. Confirm with the SET button and move to Beep sound on/off.
2.
BEEP and the word ON will flash. Press and release the + or - button to turn this to OFF to avoid beep
sounds when pressing a button. Confirm with the SET button and move to atomic time (ATOMIC
ON/OFF).
3.
ATOMIC and the word ON will flash. Press and release the + or - button to turn this to OFF if you do not
wish atomic time reception. Confirm with the SET button and move to time zone.
Note: If OFF is selected, you will skip DST & Time Zone and move next to 12/24 hour time format.
4.
DST will flash and the word ON. Press and release the + or - button to turn this to OFF if you do not
observe DST. Confirm with the SET button and move to Time Zone.
5.
EASTERN will flash. Press and release the + or - button to select a different Time Zone: Confirm with the
SET button and move to the 12/24 hour time.
6.
12HR will flash. Press and release the + or - button to select the correct hour. Confirm with the SET
button and move to the hour
7.
The hour will flash. Press and release the + or - button to select the correct hour. Confirm with the SET
button and move to the minutes.
8.
The minutes will flash. Press and release the + or - button to adjust the minutes. Confirm with the SET
button and move to the year.
9.
The year will flash. Press and release the + or - button to select the correct year. Confirm with the SET
button and move to the month.
10.
The month will flash. Press and release the + or - button to select the correct month. Confirm with the
SET button and move to the date.
11.
The date will flash. Press and release the + or - button to select the correct date. Confirm with the SET
button and move to F/C.
Note: The Day of the Week will set automatically when the year, month and date are set.
12.
°F will flash. Press and release the + or - button to select Fahrenheit or Celsius. Confirm with the SET
button and exit.
PROGRAMMABLE PRESSURE
