La Cimbali M200, Engineer'S Manual, Page: 7 / 102

English
2 EN
English
Description of display symbols
WATER LEVEL
This symbol indicates the boiler water level.
During the loading phase, the bottom part of the
icon blinks.
When the optimum level is reached, the symbol
looks like this .
HEATING ELEMENT
This symbol indicates that the heating element is
activated and functioning; a thicker luminous flow
passing through the heating element shows the
electric heating is on.
When the boiler pressure reaches the set value,
the icon looks like this .
This indicates that the boiler heating element has
been disabled.
N.B.: the customer cannot switch the electric
heating on or off.
When the on/off function is programmed, the
electric heating takes place automatically.
BOILER PRESSURE
This symbol indicates the boiler pressure value.
If the icon is pressed, the pressure gauge
will be displayed analogically. This will be shown
on the display:
Press again the icon to return to the
regular display mode.
CUP WARMER
These symbols indicate the
power currently selected for
the cup warmer.
WI-FI
This symbol appears on the display when the
Wi-Fi module is in the machine.
BLUETOOTH
These symbols refer to Bluetooth communication:
- the white icon indicates the presence of the
Bluetooth module on the machine;
- the white icon on blue background indicates that
the machine is communicating with a Bluetooth
grinder/dispenser.
USB
This symbol appears on the display when a USB
pen drive is connected.
PAYMENT SYSTEMS
This icon indicates that the machine is connected to a
payment system interface and is configured to work with it .
Dispensing is therefore possible subject to approval by the
payment system.
- the red icon indicates that the cash system has
denied the transaction;
- the blue icon indicates that the cash system has
approved the transaction.
CONTROL OF THE FLOW (ONLY IF IN USE)
When this animated icon appears it means that it is
necessary to adjust the grinder/dispenser to tighten or
loosen the grinder, in order to return the coffee dose to
the correct parameters.
The icons that are shown are:
means that the grinder needs to be loosened.
(flow of coffee is lower than the reference).
means that the grinder needs to be tightened.
(flow of coffee is greater than the reference).
Note. The number next to the icon (1 or 2) indicates the
grinder/dispenser that must be adjusted.
The icon appears on the display instead of the level
symbol.