La Cimbali M200, Engineer'S Manual, Page: 62 / 102

English
57 EN
English
-

+

Grinder control parameters configuration
1. disable grinder control, if in use.
2. set and calibrate the machine and grinder/dispenser as
desired.
3. dispense into the test square all the types of beverages
to be used (double coffee, single coffee and any special
blend - third key).
4. write down the satisfactory flow values of the coffees for
each of the possible three types of beverage.
5. go to the grinder control panel and perform reset.
6. set the flow values for each of the beverages.
7. enable grinder control.
Note: Set the Q.ref of double coffees first for proper
functioning of grinder control.
When this animated icon appears, it is necessary to adjust
the grinder/dispenser to tighten or loosen the grinder
in order to return the coffee dispensing to the default
parameters.
The icons that are shown are:
means that the grinder needs to be loosened.
(flow of coffee is lower than the reference).
means that the grinder needs to be tightened.
(flow of coffee is greater than the reference).
Note. The number next to the icon (1 or 2) indicates the
grinder/dispenser that must be adjusted.
The icon appears on the display instead of the level
symbol.
: manual grinder control (for grinder/dispensers with no Bluetooth connection option.

MM1
enabled
reset NO
reg. threshold 10%
Q ref. 1B 3.90 ml/s
Q ref. 1A 3.50 ml/s