14221-1800-2050, Rev. G
87
7. Press the up or down navigation buttons to select ADD CHAN/DELETE CHAN, SET PRI1,
SET PRI2, REMOVE PRI, or NUISANCE/ADD BACK.
When a channel is not grayed out in the list,
DELETE CHAN
appears. When a channel/group
is grayed out (not in list),
ADD CHAN
appears.
8. Press the Menu/Select button to toggle selection.
6.14.5 Set or Remove Priority 1 and Priority 2 Channels
Priority channels are scanned more often than non-priority channels. Note that P1 and P2 can
only be set if configured as “Keypad” and the scan list is not set to “Fixed” using RPM2.
To set or remove priority 1 and priority 2 channels:
1. Press the Menu/Select button.
2. Press the left or right navigation buttons to display the
SCAN
menu.
3. Press the up or down navigation buttons to highlight SCAN LISTS and press the Menu/Select
button.
4. Press the up or down navigation buttons to highlight the desired scan list and press the
Menu/Select button.
5. Press the up or down navigation buttons to highlight the desired channel/group.
6. Select
OPTIONS
.
7. Press the up or down navigation buttons to highlight
SET PRI1
or
SET PRI2
and press the
Menu/Select button. A Priority 1 channel appears with a P1; a Priority 2 channel appears with
a P2.
8. Select
REMOVE PRI
to remove priority.
