L3Harris Narda SignalShark, User Manual

Page: 193 / 231

Map View
193
To zoom in/out:
Tap the corresponding button to set the desired zoom level.
Selecting a data type
A map can visualize several types of data:
Data type Description
No data No data is displayed in the map.
General Shows all stored localizations marked with a flag.
Localization This determines the transmitter position while recording current
bearings. For heatmap localization choose this data type.
Localizations All stored localization results in the current working directory are
displayed.
Bearings Discrete bearings are displayed in the map.
To select a data type:
1. Tap the Data Type button and select an entry from the dropdown list.
2. Press the Rotary knob or the OK key.
Select Ftune
This button shows the frequency set in the Spectrum view or in the Bearing view.
For more information about setting
Ftune
see Spectrum View or Bearing View .
Selecting data sets
Select a data set according to your needs:
•
FEHLER: Variable (discrete) ist nicht definiert.: when performing discrete bearings
•
open record : when performing a localization with saved bearings
To select data sets:
1.
Tap the Select Data Sets button and select an entry from the dropdown list.