COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Initial Issue Page 302
Sep. 30/11
Disassembly
23–70–40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Connector
Figure 301.
Recorder Independent Power Supply (RIPS) Removal
3.
MODEL FA5000 DISASSEMBLY INSTRUCTIONS
Special tools, fixtures, and equipment that are needed to disassemble and repair the
Model FA5000 are listed in Figure 901.
NOTE:
Numbers shown in parentheses in the following text and figures are
the Illustrated Parts List (IPL) figure number followed by the IPL item
number for a particular part; e.g., (1-100) for IPL Figure 1, Item 100.
For items listed in the parts list but not illustrated, the item number is
preceded by a “-”.
In addition to the IPL figure references, each disassembly instruction is accompanied with
an illustration showing specific assemblies or subassemblies to which the steps of the
procedure are related. The figures in this section contain the same figure/item number ref-
erences identifying the piece parts of the assembly as in the IPL figures; however, differ-
ent views of the assemblies may be provided to facilitate disassembly tasks.
Rev.05 Page 302
May 06/14
The document reference is online, please check the correspondence between the online documentation and the printed version.
