L3 500-4030-000 RIPS Maintenance Manual Download

Page: 116 / 209

COMPONENT MAINTENANCE MANUAL

AVIATION PRODUCTS

Model FA5000

Rev. 02 Page 118

July 21/17

Testing & Fault Isolation

23–70

−

Use or disclosure of information on this sheet is subject to

the restrictions on the cover page of this document.

Figure 119. CATS, CVDR Fault History Log

(r)

Click on

Yes

. The autotest will now proceed in completing the autotest

which will take approximately 30 minutes or less.

Figure 120. CATS, Continue Test Confirmation

(s) At the end of the test, save the report by selecting

File => Test Report =>

Save Report

NOTE: The test report is named with the part number of the Unit Under Test and

the serial number provided in the Information section of the test. The test
report is located in the following default location: C:\Program
Files\L

−

3Com\CVRTester\Reports. This file is in an ASCII text file format.

(t)

If the autotest is successful, clear the fault history log by the pull down
menu, click on

Test=>Clear Fault History

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for 500-4030-000 RIPS


















































































































































































































Search results

Summary of Contents for 500-4030-000 RIPS

Reviews:

Related manuals for 500-4030-000 RIPS

Brands by name

Popular brands

L3 500-4030-000 RIPS, Maintenance Manual

Search results

Summary of Contents for 500-4030-000 RIPS

Reviews:

Related manuals for 500-4030-000 RIPS

Brands by name

Popular brands