L3 Communications Targa 4 Series, Technical Reference And Installation Manual

Page: 6 / 16

TARGA SYSTEMS
S4 SATA & USB DTU Installation Guide 32003444 Rev A
3
2.3.2 Data Transfer Device
Size 0.75" h x 4.75" l x 2.95" w
Weight < 500 g (capacity dependent)
Mounting Retained and supported by DTU, with locking
door
Write Protect Only supported by Targa’s NAS DTU and GSU
products.
2.3.3 Ground Support Unit
Power: Auto ranging 110 – 260 VAC 50-60Hz
Case Size 2.7"h x 9.50"w x 11.35"l
with rear panel 60mm, 22cfm ball bearing fan
Power Cord IEC320 C13 AC socket
Weight
3.7 Kg Nominal
Indicators Front Panel Power LED
Busy LED
2.4 Environmental Characteristics
2.4.1 DTU and DTD (with DTD inserted in DTU and operational)
Temperature -40
°
C to +71
°
C operating, MIL-STD-810E, Method 501.3
-55
°
C to +85
°
C storage, MIL-STD-810E, Method 502.3
Humidity 10 - 100% condensing, RTCA DO-160D, Sec 6, Cat B
Altitude 50,000 ft, MIL-STD-810E, Method 500.3
Shock 20g, 1/2 sine, 9ms, 3 axis, MIL-STD-810E, Method 516.4
Crash Hazard 40g, 1/2 sine, 9ms, 3 axis, MIL-STD-810E, Method 516.4
Vibration PSD 0.04g
2
/hz, 5-2000hz, MIL-STD-810E Method 514.4, Cat 10
Waterproofness RTCA DO/160D, Sec 10, Cat W
Sand & Dust RTCA DO/160D, Sec 12, Cat D
Salt Spray RTCA DO/160D, Sec 14, Cat S
Fungus Resistant
EMI MIL-STD 461 CE102, CS06, CS101, CS114, RE102,RS103
2.4.2 Ground Support Unit (GSU)
Temperature -5
°
C to +50
°
C operating,
Humidity 10% - 80%