MPM-1000A Operator Manual
1000-7075 Rev E
4-6
confirm your software version and ensure you have appropriate documentation and
software drivers loaded for your system.
Access the screen by clicking
Software
→
Version
.
Figure 4-6 Software Menu
The list displayed shows the versions of software resident in the Modem, the current
version of the HCI, and the loaded configuration file (if any).
4.9 Modem CDU Port IP Address
The IP address for the CDU port must be set to allow communication with the Modem.
The default (shipped) address of the modem CDU port IP address is 192.0.1.2. This
may be changed if required. To change this IP address, you must set the IP address in
the
IPv4 Address
portion of the
HCI COMM Address Screen
. A change to the IP
Address does not take effect until the Modem has been rebooted.
a. Select
Configure → HCI COMM Address.
(See Figure 4-7)
