manualshive.com logo in svg

L3 Communications 17TES0043, Operator'S Manual, Page: 87 / 92

Share
Download
L3 Communications 17TES0043 Operator'S Manual Download Page 87

AVIATION  RECORDERS

OPERATOR'S  MANUAL

MODEL FA2100GSE

PORTABLE INTERFACE (PI)

Operating Procedures

Aug. 01/03

Rev. 03  Page 8-1

8.1

PI OPERATING PROCEDURES

This section is provided for quick reference.

Section 7.2

STARTING SIMULATED CVR MODE

Section 8.3

CHANGING SCREEN CONTRAST

Section 8.4

CHANNEL SELECTION

Section 8.5

VOLUME SELECTION

Section 8.6

AUDIO SELECTION

Section 8.7

PLAYBACK OPERATION

Section 8.8

FILE PLAYBACK OPERATION

Section 8.9

DOWNLOAD CVR DATA FROM RECORDER

Section 8.10 WORD MONITORING
Section 8.11 SETTING MEMORY MARKERS
Section 8.12 DOWNLOAD FDR DATA FROM RECORDER
Section 8.13 VIEWING RECORDER STATUS
Section 8.14 VIEWING RECORDER VERSION INFORMATION
Section 8.15 CLEARING / SETTING RECORDER FAULT CODES
Section 8.16 DELETING FILES FROM DATA DISK
Section 8.17 DISPLAYING GMT / ROTOR INFORMATION
Section 8.18 OUTPUTING FAULT LOG TO A DATA FILE
Section 8.19 OUTPUTING TRACE MESSAGES TO A DATA FILE

8.2

STARTING SIMULATED CVR MODE

This procedure is only performed in order to start the PI in Simulated CVR mode.

BEFORE power is applied to the PI unit, the following procedures must be performed.

CONNECT the auxiliary power cable to the end of the recorder interface cable, which origi-
nates at the top of the PI unit.

CONNECT the auxiliary power cable to an inactive 28 to 39 VDC power source.

DEPRESS AND HOLD the Select and Up Arrow buttons on the PI and apply power to the
unit.

RELEASE the Select and Up Arrow buttons when the Main Menu appears on the PI dis-
play.

8.3

CHANGING SCREEN CONTRAST

This procedure may be performed in any of the PI’s operating modes.  This procedure can
be performed while on the Main Menu only.

INCREASE the screen contrast (darken the screen) by positioning the highlight over the
top entry on the menu.  While the highlight is positioned on the top entry, press the up ar-
row key.  The contrast adjustment occurs in small increments, so the up arrow key may
need to be pressed multiple times to obtain the desired adjustment.

Summary of Contents for 17TES0043





























































































Reviews:

No comments