L3 Communications 17TES0043 Operator'S Manual Download Page 64 | Manualshive

Page: 64 / 92

L3 Communications 17TES0043 Operator'S Manual Download Page 64

AVIATION RECORDERS

OPERATOR'S MANUAL

MODEL FA2100GSE

PORTABLE INTERFACE (PI)

Rev. 01 Page 5

−

16

May 01/99

CVDR Operation

5.3.5

Playback/Control Menu

This menu is similar to the Monitor Menu and can be accessed from the Playback Menu by
pressing the Red Key. The operator can enter it while playback is underway without inter-
rupting the audio being played back. The operator can turn the various channels on or off
in the same way as described for the Monitor Menu (paragraph 5.3.1). Volume control op-
eration is identical to that described for the Monitor Menu.

The user can return to the Playback Menu from this menu by positioning the highlight over
the word BACK and pressing the SELECT key. While at this menu, the user can press the
green key and return to the Main Menu. Highlighting FILE and pressing the SELECT
switch brings up the CVR File Control Menu. (Note: for a shortcut from the top right of the
menu to FILE, press left arrow key.)

5.3.6

CVR File Control Menu

The CVR File Control Menu enables the operator to identify each file and select it for Play-
back or for copy to the disk mounted in The PI. As shown in Figure 5

3, CVR file identifi-

cation includes :

D

File Name And Field : Identify the file being played back.

D

Date Record Made: Day (2 digits)

−

Month (3 letters)

−

Year (4 digits)

D

Time Record Made: Hours (XX)

−

Minutes (XX)

−

Seconds (XX)

D

File Size: Kbytes

D

Record Duration: Hours (XX)

−

Minutes (XX)

−

Seconds (XX)

The operator can select the particular file of interest by using the DOWN cursor position
key to access the next file, or using the UP cursor key to access the previous file. The
words PLAY, COPY, and BACK are displayed on the bottom line of the CVR Control Menu.
When the operator selects PLAY, the File Playback Menu is displayed. When COPY is
selected, a File ID Menu is selected. When BACK is selected, the display returns to the
Playback Control Menu.

5.3.6.1

File Playback Menu

When PLAY is selected at the CVR File Control Menu, The File Playback Menu is dis-
played on the screen. As shown in Figure 5

3, sheet 2 of 2, The File Playback Menu is

similar to the Playback Menu with the exception that the ID of the file selected at the CVR
File Control Menu is displayed on line 1. The keypad keys are remapped as shown on the
File Playback Menu. This remapping is identical to that described for the Playback Menu,
Paragraph 5.3.2.1. The operator can perform all of the playback functions on the selected
file. The MODE, POSITION, ROTOR, and GMT displays are identical to those described
in Paragraph 5.3.2.2.

«
...
62
63
64
65
66
...
»

Summary of Contents for 17TES0043





























































































Reviews:

No comments