MISSION WOODEN BENCH
Thank you for purchasing our Mission Wooden Bench. Assembly of this product requires a Phillips screwdriver (screw gun with Philips head recommended) and a hammer.
7554 0TPW5170808
Page 1: ...MISSION WOODEN BENCH Thank you for purchasing our Mission Wooden Bench Assembly of this product requires a Phillips screwdriver screw gun with Philips head recommended and a hammer 7554 0TPW5170808...
Page 2: ...aterial Place wooden parts on non abrasive surface like carpet or carton to prevent damage to finish Assembly of this product requires a Phillips screwdriver and a hammer Identify and count hardware u...
Page 3: ...in Seat Skirt B pointed inward as shown on right Fully tighten STEP 3 Slide Plywood Seat Bottom D into grooves in Seat Skirt B until it slides completely into groove in Side Assembly A as shown on ri...
Page 4: ...opposite Side Assembly A to ensure everything is fully tightened STEP 6 Use a hammer to lightly tap Flush Plugs into predrilled holes on Side Assemblies Tap until fully flush on the unit Place cushio...
