STEP 5
Attach Cabinet Door (C) by lining it
up on the 1” Pin on Cabinet Bottom
(B) as referenced in Step 3 with top
1” Pin being inserted into bottom of
Cabinet Top (E) predrilled hole as
shown on right. Fasten Cabinet Top
(E) using four 1-1/4” screws.
STEP 6
Attach Drawer Pull to Drawer (F)
by inserting through holes in
Drawer (F) and securing with pull
screws provided.
Attach Door Pull the same vertically
with pull assembled to face on top.
STEP 7
Slide Drawer in on Side Assembly
(A) slats and push both Drawer Stop
Dowels on predrilled holes on top of
Drawer (F) as shown on right.
STEP 8
Attach Magnet Plate with ½” Flat
Screw on Cabinet Door (C) as
shown on right.
STEP 9
Place Top (G) onto Side Assemblies
(A) and fasten with remaining 1-
1/4” screws as shown on right.
STEP 10
Insert flush plugs to cover screws
in Side Assemblies (B) and tap
lightly into place with a hammer.
CARE
Dust as needed with soft cloth. Clean with
damp cloth and mild solution of dish soap.
Polish with soft cloth and polish that
contains no pigment or silicone.
Product Support 1 800 341 4341
