USB to RS-422 / RS-485 Adapter
Uninstalling Instruction
When uninstalling devices from Windows 2000, it should always be done through the Add/Remove Programs
utility as this uses the FTDI driver uninstaller program to remove files and registry entries to leave a clean
system. Other methods may leave fragments of the driver that may interfere with future installations.
Disconnect any devices that are attached to the PC.
Open the Add/Remove Programs utility located in "Control Panel\Add/Remove
Programs ".Select "FTDI USB Serial Converter Drivers" from the list of installed programs.
Click the "Change/Remove" button. This will run the FTDI uninstaller program. Click "Continue" to run the
uninstaller or "Cancel" to exit.
When the uninstaller has finished removing the device from the system, the caption on the "Cancel" button
will change to "Finish". Click "Finish" to complete the process.
27
