background image

Attention 

The Oval tube heaters has been 

designed, tested, and evaluated 

by the L. B. White Company as a 

radiant tube heater according to the 

requirements of standard IAS U.S. 

Requirements 8-94. All heaters 

are designed specifically for the 

intended use of heating poultry 

confinement buildings.

CHECK WITH YOUR LOCAL 
FIRE SAFETY AUTHORITY, 
YOUR LOCAL FUEL GAS  
SUPPLIER, OR THE L.B. 
WHITE COMPANY IF YOU 
HAVE QUESTIONS  
REGARDING APPLICATIONS.

www.lbwhite.com

SCAN THIS

with your smartphone or

visit http://goo.gl/yyKxJo to  

view maintenance videos  

for L.B.White heaters.

WORLD PROVIDER - INNOVATIVE CLIMATE SOLUTIONS

411 Mason Street, Onalaska, WI 54650  •  800-345-7200  •  608-783-5691  •  608-783-6115 (fax)  •  www.lbwhite.com

Propane Vapor Withdrawal 

or Natural Gas

Listed under U.S. Patent #: 9,303,880

Oval 80 

v.2

Oval 90 

v.2

Radiant Tube Heaters

AR080

AR090

80,000 Btuh

90,000 Btuh

Owner’s Manual and Instructions

View this manual online at www.lbwhite.com

*  Requires an app like QR Droid

for Android or for iPhone

SEE ASSEMBLY

INSTRUCTIONS

INSIDE

Please refer to important 

elevation information on  

inside cover.

The herein installation instructions are the L.B. White Co. LLC 

suggested recommendations and guidelines for temporary or 

permanent installation of the L.B. White Co. LLC heaters. Local, 

state, and electrical and safety code requirements supersede these 

guidelines. In the absence of local codes, see page 7 for  

installation in the U.S. or Canada.

Congratulations!

You have purchased the finest agricultural building heater available. 

 

Your new L.B. White heater incorporates the benefits from the most experienced 

 

manufacturer of heating products using state-of-the-art technology. 

We, at L.B. White, thank you for your confidence in our products and welcome 

 

any suggestions or comments you may have...contact us at 1-(800)-345-7200,  
or email us at [email protected].

NOTICE

ACCESSORIES:

i.e. Regulator

not included and

is sold separately.

Summary of Contents for Oval 90 v.2









































































Reviews: