L-Acoustics V-DOSC Operator'S Manual Download Page 27 | Manualshive

Page: 27 / 158

background image

L-ACOUSTICS V-DOSC Manual Version 4

6/29/2005

Page 27 of 158

AMPLIFICATION
(18) L-ACOUSTICS LA48a

Compact, light weight two-channel power amplifier (2 rack units, 10 kg), 1300 watts per channel into
8 ohms, 2300 watts per channel into 4 ohms.

Figure 13: L-ACOUSTICS LA48a Power Amplifier

Note: for full details see the LA48a user manual (available for download on:

www.l-acoustics.com

)

AMPLIFIER RACKS
(19) RK12U

12 rack unit amplifier rack (empty). Light-weight aluminum space frame construction, internal
shock mounting, standard rack rails, provision for rear support of amplifiers, transparent lexan
doors that store inside the rack, high impact resistance polyethylene cover (no external case
required). Recessed Aeroquip flytrack sections for flown applications.

(20) RK122a

RK12U supplied with PADO2a, PADOSEC, 2U drawer, 2U blank panel, rear support kit for 2
L-ACOUSTICS LA48a power amplifiers (LA48a power amplifiers not included).

(21) RK124a

RK12U supplied with PADO4a, PADOSEC, rear support kit for 4 L-ACOUSTICS LA48a power
amplifiers (LA48a power amplifiers not included).

(22) PADO2a AMP PANEL

Amplifier panel supplied with RK122a suitable for 2 amplifier rack configuration. Single 8 pin
female CA-COM connector for loudspeaker connection (in parallel with 4x Speakon
connectors), two male 19 pin CA-COM connectors for signal distribution (input/through),
COMB connector (for selecting 2-way, 3-way or subwoofer operating modes); 4x male XLR
and 4x Speakon fanouts on the internal side (for connecting to amplifier inputs and outputs).

Note: PADO stands for PATCH DOSC

(23) PADO4a AMP PANEL

Amplifier panel supplied with RK124a suitable for 4 amplifier rack configuration. Dual 8 pin
female CA-COM connectors for loudspeaker connection, two male 19 pin CA-COM
connectors for signal distribution (input/through), 2x COMB connectors (for selecting 2-way, 3-
way or subwoofer operating modes); 2 pairs of 4x male XLR and 4x Speakon fanouts on the
internal side (for connecting to amplifier inputs and outputs).

(24) COMB

CONNECTOR

Routes desired input lines from the male 19 pin CA-COM connector to the appropriate
amplifier inputs allowing RK122a or RK124a amplifier racks to be configured in 2-way (dV-
DOSC, ARCS), 3-way (V-DOSC, KUDO) or subwoofer (SB218) operating modes (COMB
connectors: D2WAY, D3WAY and DSUB, respectively). Additional COMB connectors are
available for use with 2- or 3-way format systems (D2WA, D2WB, D2WSTEREO, D3WA,
D3WB, DSUBA, DSUBB) and a COMB connector kit for subwoofer array signal processing or
for powering passive enclosures (DSUBTK).

(25) PADOSEC

Mains distribution panel, 32 amp connector, 5x AC receptacles

«
...
25
26
27
28
29
...
»

Summary of Contents for V-DOSC































































































































































Reviews:

No comments

Related manuals for V-DOSC

Backline Series sheet

Brand: Gallien-Krueger Pages: 16

OBJECTIVE2+ODAC REVB

Brand: JDS Labs Pages: 9

Brand: TC Electronic Pages: 22

Acoustasonic Junior DSP

Brand: Fender Pages: 20

Brand: EAW Pages: 24

Brand: Alpha Pages: 4

Brand: Crown Pages: 1

SU-Z65 - SERVICE

Brand: Technics Pages: 20

Brand: Lanzar Pages: 13

Brand: LD Pages: 28

K2 DSP+AESOP, K3 DSP+AESOP

Brand: powersoft Pages: 92

Axiom HPD3400PFC

Brand: PROEL Pages: 24

Brand: NavAtlas Pages: 10

Brand: Tsunami Pages: 12

Brand: Jas Audio Pages: 5

Platinum Hybrid

Brand: Audion Pages: 6

Brand: RAM Pages: 17

Brand: Zenith Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands