Rigging procedures
Mounting SB10r in a ceiling tile with SB10r inTile
type of deployment
ceiling-mounting
rigging accessories
SB10r inTile, including:
• SB10r enclosure
• SB10r-Tilescreen
• 4 rigging brackets
4 max. Ø6 mm / 0.24 in threaded rods
8 corresponding nuts
4 M6x16 Torx screws (provided)
additional material
tethers for secondary safety
torque screwdriver
tools
T30 Torx bit
min. number of operators
2
SB10r-Tilescreen is only compatible with 600x600 mm (2x2 ft) tiles (European standard).
Secondary safety with SB10r-Tilescreen
Use the available holes to implement a secondary safety.
240 mm / 9.4 in of room are required between the main ceiling and the suspended ceiling to install the
enclosure assembly.
m
in
. 2
40
m
m
/ 9
.4
in
SB10r owner's manual (EN) version 1.1
35
Summary of Contents for SB10r
Page 1: ...SB10r owner s manual EN...
