Rigging procedures
Mounting SB10r in a wall with SB10r inWall
type of deployment
wall-mounting
rigging accessories
SB10r inWall, including:
• SB10r enclosure
• SB10r-inW rigging accessory
• SB10r-Screen
• cardboard cutting template
6 M6x20 Torx screws (provided)
1 M4x12 Torx screw (provided)
additional material
secondary safety tether (provided)
torque screwdriver
T30 Torx bit
T20 Torx bit
tools
4 mm hex bit
min. number of operators
1
Use reinforcements on the drywall for supporting the enclosure assembly.
As reinforcement, use either a second layer of drywall, or wooden battens or panels.
The total thickness of the drywall and its reinforcement should not be more than 30 mm / 1.2 in.
Secondary safety for in-wall congurations
Use the provided tether to implement a secondary safety.
185 mm / 7.3 in of room are required between the main wall and the secondary wall to install the enclosure
assembly.
min. 185 mm / 7.3 in
20
SB10r owner's manual (EN) version 1.1
Summary of Contents for SB10r
Page 1: ...SB10r owner s manual EN...
