L-Acoustics SB10r, Owner'S Manual

Page: 15 / 57

Rigging system description
The bracket tools can be used in two positions:
• position 1: to position the threaded rods on the main ceiling, using a plumb bob
• position 2: to adjust the height of the enclosure when mounted to the threaded rods
position 1
position 2
plumb bob
The bracket tools can be temporarily xed to the drywall ceiling using two drywall or wood screws.
position 1
position 2
SB10r-Screen
SB10r-Screen is an acoustically transparent screen for in-wall or in-ceiling congurations with SB10r and SB10r-inW or
SB10r-inC. SB10r-Screen is secured to the assembly using four barbed push fasteners.
SB10r-Screen can be secured to the rigging accessory using the tether and the provided M4x12 Torx screw for
additional safety.
Four longer barbed push fasteners are provided for congurations in thicker ceilings. To replace them, refer to
APPENDIX
C: Replacing SB10r-Screen barbed push fasteners (p.53).
SB10r owner's manual (EN) version 1.1 15