Flown array options and site angle setting
KARA-MINIBU site angle setting
The KARA-MINIBU site angle setting will be discrete or continuous depending on the chosen rigging option.
Rigging options 1 and 3
offer 17 discrete site angle values in each conguration by selecting the single shackle
position (holes 1-17). The hole numbering convention is shown in the gures below.
For rigging options 1 and 3 the KARA-MINIBU site angle will also depend on the size and shape of the array
(number of enclosures and inter-enclosure angles). Refer to
for site angle calculation.
Hole 15 allows setting the site angle of an SB18 standalone array to 0°.
Rigging hole numbering convention for KARA-MINIBU
Rigging hole numbering convention for KARA-MINIBU/KARA-MINIBUEX
Rigging options 2 and 4
allow continuous KARA-MINIBU site angle setting depending on the relative heights
between the front and rear hang points (holes 1 and 17) as shown in the gure below.
The congurations shown in the gures below are purely indicative.
Always refer to the mechanical data and warning indications provided in
(
Mechanical
Data
section) to verify the mechanical conformity of the loudspeaker system before installation.
Kara owner's manual (EN) version 1.0
193
