Rigging procedures
11.
Close the four KARA#1 arms as follows (repeat on both sides of the enclosure):
a) Remove the front top R-BLP from its
link
hole, slide the front arm up, rotate it down, and lock it in place by re-
inserting the R-BLP into its
storage
hole.
The front top
storage
and
link
holes are the same.
b) Remove the rear top R-BLP from its angle hole, slide the angle arm so as to align the cursor with the storage label,
and lock it in place by re-inserting the R-BLP into its
storage
hole.
12.
Attach the lid to the ight-case.
112
Kara owner's manual (EN) version 1.0
