Multi-Image Splicing Processor
2
3.2 Debugging Steps
Step 1
：
Click "MENU" to enter the main MENU interface, select "Device Mode", and select
the stitching mode of the device: 2X2, 2X3 and other modes.
Note: Select the splicing mode corresponding to LCD display when splicing, and you can
customize the splicing mode
Step 2
：
Return to the main menu interface, select "Screen Layout", enter the screen number
selection interface, select the number of screens to be set.
Note: this step can be skipped for single screen, as long as the number of screen and project
requirements are consistent for multiple screen, inconsistent layout can be set through the
following operations.
Step 3
：
Click "MENU" to return to the main MENU, click the corresponding signal source
group on the front panel, select the corresponding signal and click "OK" to confirm.
Device Mode
Copy Output
Horizontal Splicing
Vertical Splicing
Cross Splicing
OUT
Note:
All output displays are
the same.
