Multi-Image Splicing Processor
15
Information-signal Condition
Image Switch
Image 1
S1
Image 2
S1
Image 3
S1
User Mode
Image 1
S1
User Mode 1
Device Mode 2x2
Image Layout 1
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
“User mode” and call needed mode.
3.4 Function Key:
Below are detailed explanations of function keys:
INFO:
Information query key. Click this key and enter into its interface showing whether all
signal sources are inputting normally. Its interface is shown as below. Red light means signal is
lost while green one shows signal is normal.
WIN:
Image key. Click this key to enter into its interface and signal source selection can be
made in the following interface. Taking image 3 as instance, click “WIN” to enter into image
switch interface which shows current signal sources of three images. If signal source switch is
needed, rotate the knob first to select the image and switch by “S1-S6” of the front panel.
