Beijing Kystar Technology Co., Ltd.
56
7.9.3 Master control
"Real-time linkage mode" switch
The program adds a "real-time linkage mode" status switch under the "canvas"
menu.
After being selected, the master will operate once and the slave will execute
synchronously.
If it is not selected, the primary side operates once, and the secondary side remains
unchanged.
The synchronized instructions include new project, open project, save project, all
editing operations and broadcast control operations in the project. Cannot include canvas
zoom, window layout adjustment, scheme group switch, various settings popups, etc.
The standby side does not pop up any settings and confirmation popups, only the
corresponding results are synchronized.
Update operation
The program adds an "Update" operation under the "Canvas" menu. When clicked,
the project and media data files will be synchronized to the standby side, and the project
content and playback progress of both parties will be completely the same.
Because the update itself is an operation instruction, the "Real-time linkage mode"
switch is required to be turned on, otherwise the execution is invalid.
The project will be synchronized first when the update is performed. At this time, a
processing progress window will appear to limit user operations. It may take up to 30
seconds to confirm whether the update can be performed.
After the project is synchronized, the Update progress window can view the file
transfer progress and status. After the file transfer is completed, the standby device will
be refreshed automatically.
If the message "Insufficient space" is displayed during the active / standby update,
please visit the AppData cache directory on the standby side to clear the cache files, or
confirm that all disks in APPData have sufficient space.
The transferred file includes all the files in the material library, thumbnails of the
plan, and screenshots generated by the master KV. The system will first determine
whether the same file exists in the same path on the standby end, and then determine
whether the same file exists in the AppData directory, and then transfer it. If the file
transfer error occurs, you can perform "Update" again to retransmit.
7.9.4 KiR and splicer
