KLS24manual
www.kystar.com.cn
13
7.2 Software connection
，
Click Device Selection, select Video wall , and then click Connecting Devices , Pop-up
Communication Settings window, as shown in the following illustration:
The software can choose NET or COM two ways to connect, choose a different connection way
to prepare for different.
7.2.1 select NET connect
（
1
）
Wiring
Use CAT5 network cable, one end connected to the processor LAN Port, one end is connected
to PC the network port of the, which can also be connected through a switch.
（
2
）
Modify Local Area Connection IP
In Windows system, go to Start
→
Control Panel
→
View Network Tasks
→
Change Adapter Settings, you can find Local Area Connection, right-click Local Area
Connection and select Properties, the following dialog box will pop up, double-click
Internet Protocol Version 4 (TCP/IPv4), and set the The data modification and other
IP addresses in the same network segment of the splicer, for example, the default IP
address of the splicer is 192.168.0.100, at this time, the IP address of the computer
can be modified to 192.168.0.123, and the subnet mask is 255.255.255.0. As shown
below.
