KLS24manual
www.kystar.com.cn
11
6
、
cable connection and Installation
Cable connection diagram
Installation steps
1
、
Wiring as shown in the figure, connect the output port of the server graphics card to
the input port of the KLS24 controller;
2
、
Then connect cable as shown in the figure, connect the control computer to the
LAN control port of the device through the network cable, and connect the output
network port of the KLS24 controller to the receiving card;
3
、
Make sure that the wiring is correct and then power on and open the gold card
debugging software. The software can correctly identify the model of the sending card
and the number of receiving cards, and the debugging can be done normally.
