Kyoeisha BARONESS LM56GC, Owner'S Operating Manual

Page: 52 / 89

Travel of Machine
Traveling Procedure
Caution
Under any circumstances drive the machine at
such a speed that you can stop it immediately
for emergencies.
Caution
Do not start to move or stop the machine
abruptly.
Install traveling tires.
Flip up the stand.
Set the traveling/working selector lever to
"Travel ON" position of.
Start the engine.
Release the brake.
Release the safety lock and grip the main
clutch lever slowly.
The machine starts traveling.
Cutting Work
Cutting Work
Warning
Do not operate on a steep slope.
Caution
Do not start to move or stop the machine
abruptly.
Caution
Be sure to operate at an appropriate speed for
the mowing site.
For mowing on an undulated surface, mow
with lowered cutting speed.
Important
Be sure to attach the grass catcher.
Discharge the clippings at the right time during
operation.
Remove the traveling tires.
Flip up the stand.
Install the grass catcher.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
Move the air adjusting plate to the desired
position.
Move the groomer clutch lever to the desired
position.
Make the traveling/working selector lever to
the "Reel ON" position.
Start the engine.
Release the brake.
Release the safety lock and grip the main
clutch lever slowly to start mowing.
Note:
The factory default maximum engine rotation
speed is set to 3,400 rpm.
Operate at about 3,000 rpm.
4.
5.
6.
7.
8.
9.
LM56GC
・
LM66GC / LM66TC
Handling Instructions
Page 4-28
Travel of Machine