Kyoeisha Baroness LM531, Service Manual

Page: 118 / 161

Parking Brake Circuit
Note:
The parking brake has a proximity switch
associated with the interlock system.
The switch contact point is activated through
the operation of the brake pedal, controlling
starting and stopping of the engine.
Warning
Be sure to stop the engine before adjusting
the proximity switch.
Park in a flat location and make sure to
chock the wheels so that the machine
does not move.
Depress the brake, engage the latch of the
parking brake lock lever into the second
notch, and apply the parking brake.
1
2
zoime7-001
Parking Brake Circuit_001
1 Notch
2 Latch
Find [Relay/pump neutral, brake] from the
6-polar relays at the bottom right of the
fuel tank, by referring to the relay
judgment table.
1
jryrqq-004
Parking Brake Circuit_002
1 Relay/Pump neutral, brake
￭
1.
2.
3.
(The figure shows the fitting faces of
removed 6-polar relays.
Relay judgment table
1
2 3
AVS0.85 RW
AVS0.85 RW
AVS0.85 RW AVS0.85 YL AVS0.85 GL
AVS0.85 G
AVS0.85 BW AVS0.85 WB
AVS0.85 W AVS0.85 B
AVS3 RG AVS0.85 W AVS0.85 L
AVS0.85 BW AVS0.85 WB
jryrqq-003
Parking Brake Circuit_003
B Black
R Red
Y Yellow
L Blue
Br Brown
G Green
W White
1 Relay/Reel rotation OFF
2 Relay/Pump neutral, brake
3 Relay/Engine stop solenoid
Turn the key switch to "ON."
Loosen the bolts.
Move and adjust the proximity switch
mounting board so that the relay
generates a sound when the proximity
switch magnet part comes to the position
of the sensing part.
If the sound is not generated even after
adjustment, inspect the individual relay
and proximity switch.
If there is no abnormality in the relay,
check the traveling pedal/neutral circuit.
Tighten the bolts.
1
2
3
4
5
zoime7-003
Parking Brake Circuit_004
4.
5.
6.
7.
LM531
Electrical System
Page 5-34
Electrical components