Kyocera X-tc M2000, User Manual

Page: 55 / 96

User Guide 47
9 Pictures
Camera Tips
Your phone comes with a camera. Before using
your phone’s camera, here are some tips:
• You cannot activate the camera while on an
active call or while browsing files in the media
gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a “Low memory” error, check your
resolution and quality compression settings.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
• Numbers in the top right corner indicate the
number of snapshots remaining before the
phone runs out of memory.
Take a Picture
1. To activate the camera, press and hold the
`~ãÉê~
key. You can also select
máÅíìêÉë
from the main menu.
2. Focus on the image using the phone’s display
as a viewfinder.
3. To take a picture, press the
lh
key. You can
also select
`~éíìêÉ
. The picture is saved to
jó=éáÅíìêÉë
.
4. Select
pÉåÇ
and one of the following:
–
sá~=jjp=ãëÖ
to attach the file to a
multimedia message.
–
sá~=ÄäìÉíççíÜ
to send the file to a
Bluetooth-enabled device.
–
qç=éêáåíÉê
to print the file on a
Bluetooth-enabled device.
Select
bê~ëÉ
to delete the picture from your
phone.
5. Press the
båÇ
key to exit camera mode.
Go to My pictures
From camera mode, select
léíáçåë=[=`~ãÉê~=
áã~ÖÉë
to see all of the pictures you have taken.
These are located in
jó=éáÅíìêÉë
.
Camera Options
Camera Settings for Pictures
Adjust the Resolution
From camera mode, select
léíáçåë=[=pÉííáåÖë=
[=oÉëçäìíáçå
and a size for your pictures.
Numbers in the bottom left corner indicate the
current resolution setting.
Draft