Kyocera Triumph-Adler P-C2155w Operation Manual Download Page 69

Page: 69 / 189

5-5

Using Convenient Fax Functions > Forward Settings

Forwarding Time Setting

Display the screen.

[

System Menu/Counter

] key > [

▲

] [

▼

] key > [

FAX

] > [

] key > [

▲

] [

▼

] key > [

Reception

] >

[

] key > [

▲

] [

▼

] key > [

Forward Settings

] > [

] key > [

▲

] [

▼

] key > [

Forward Time

] >

[

] key

Configure the function.

Select [

All day

] or [

Preset Time

To forward all day, select [

All day

] and select the [

] key.

To set a forwarding start time and end time, select [

Preset Time

] > [

] key, and then set

the start time and end time.

Forwarding start time and end time settings

Set the hours and minutes of the start time.

Select the [

] key.

Set the hours and minutes of the end time.

Select the [

] key.

NOTE

Select the [

▲

] or [

▼

] key to enter a number.

Select the [

◄

] or [

►

] key to move the position being entered, which is shown highlighted.

NOTE

Select the [

▲

] or [

▼

] key to enter a number.

Select the [

◄

] or [

►

] key to move the position being entered, which is shown highlighted.

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Kyocera Triumph-Adler P-C2155w, Operation Manual, Page: 69 / 189

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews: