3-5
Sending Faxes > Basic transmission procedure
Checking the Send Status
1
Select the [Status/Job Cancel] key.
2
Display the send job status screen.
[
▲
] [
▼
] key > [
Send Job Status
] > [
OK
] key
Display the send job status screen.
3
Check the details of the transmission job.
1
Select the job you want to check.
2
[
Menu
] > [
▲
] [
▼
] key > [
Detail
] > [
OK
] key
3
Check the details of the job.
4
Select the [
OK
] key when checking of the job is complete.
Cancelling Memory Transmission (while originals are being
scanned)
1
Select the [Stop] key.
During memory transmission, to cancel scanning while originals are being scanned, select the
[
Stop
] key on the operation panel.
Scanning of originals is canceled, and the originals are ejected. When originals remain in the
document processor, take them out from the original output table.
Cancelling Memory Transmission (during communication)
1
Select the [Stop] key.
2
Display the cancel send job list screen.
[
Cancel Send Job
] > [
OK
] key
Display the cancel send job list screen.
3
Canceling Transmission.
1
Select the job to cancel.
2
[
Menu
] > [
▲
] [
▼
] key > [
Cancel Job
] > [
OK
] key > [
Yes
]
The selected job is deleted.
NOTE
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.
