Kyocera Triumph-Adler P-C2155w Operation Manual Download

Page: 142 / 189

8-2

Fax Settings > Default fax settings

Default fax settings

This section explains the fax settings in the system menu.

Operation method

Select the [

System Menu/Counter

] key to show the settings on the message display. Then, select from the settings

displayed.

Operation Method (page 2-6)

Refer to System Menu Settings on the following page and configure as needed.

NOTE

If the login user name entry screen appears during operations, log in by referring to the machine's

Operation Guide

for

Administrator User Name and Password.
The factory default login user name and login password are set as shown below.

Login User Name:

2100

Login Password:

2100

If function default settings have been changed, the [

Reset

] key can be selected in each function screen to

immediately change the settings.

1 Displays the System Menu items.

2 Selects the item displayed or changes

the numeric value.

3 Confirms the selected setting.

4 Cancels the current menu setting to

return to the menu one level higher.

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands

Kyocera Triumph-Adler P-C2155w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands